The BELPORE mercury porosimeter series for low-pressure (LP), medium-pressure (MP) and high-pressure (HP) reliably and reproducibly measures pore diameters from 1mm to 3.6nm.
The knowledge of porosity, pore sizes and pore volume is of fundamental importance for the characterization of porous materials. Mercury porosimetry is the most widely used method for determining the pore size distribution of accessible macro- and mesopores in solids.
The technique is based on the pressure-dependent intrusion of mercury as a non-wetting liquid into a porous material. Using the Washburn equation, the corresponding pore size is calculated from the applied pressure.
Microtrac, as a provider of state-of-the-art solutions in the field of particle characterization and gas adsorption, has now expanded its extensive portfolio with a series of devices specifically for the field of mercury porosimetry.
The BELPORE porosimeter series consists of state-of-the-art instruments for measuring pore size distribution, pore volume, specific surface area, porosity, density and particle distribution of finely divided and porous materials.
Please note: BELPORE – a huge step after Pascal Evo
The BELPORE series consists of the safest and most versatile mercury intrusion porosimeters on the market. Greatly improved, its roots reach back to the discontinued Pascal Evo (140, 240 and 440) series, formerly distributed by Thermo Fisher and Porotec.
The new BELPORE product range is now exclusively available via Microtrac.
Kenmerken
- Fully automatic vertical filling under constantly high vacuum
- High resolution enables detection of up to 20,000 measuring points
- Safe and full functionality without gas connection and liquid nitrogen
- Low space requirement due to compact design
- Vertical arrangement of the dilatometers ensures safe handling
- Efficient re-use of mercury via cleaning set
- All devices are CE-certified
The three mercury porosimeters from Microtrac cover different pore ranges:
- BELPORE LP (1,000 - 3.25 µm)
Degassing, Hg filling, low-pressure porosimetry
- BELPORE MP (15 - 0.0065 µm)
- BELPORE HP (15 - 0.0036 µm)
MP & HP: High-pressure porosimetry
Kwik porosimeter BELPORE Series Dilatometers & Accessoires
Available accessories
- Dilatometer (sample vessels) in different sizes for the BELPORE-Series
- Ultra-Macorpore Set (UMP)
Extends the measuring range of the BELPORE LP for pore & particle size determination - Porosimeter calibration set
For easy calibration of capacitive volume measurement
Dilatometers in various sizes for measuring porous material
The professional dilatometer offers an easy and safe handling via screw cap and integrated opening aid.
| Standard | Professional | UMP (Ultra Macropore) |
|
|---|---|---|---|
| Capillary diameter | 3 mm // 6 mm | 3 mm | 6 mm |
| Sample type | Powder // solids | Powder // solids | Powder, solids |
| Max. size of solid sample (d x h) |
12 x 46 mm // 25 x 25 mm | 11 x 35 mm | 25 x 25 mm |
| Compatible with | LP, MP, HP // LP, MP | LP, MP, HP | LP |
| Dilatometer volume | 15 cm3 // 35 cm3 | 8 cm3 | 50 cm3 |
Kwik porosimeter BELPORE Series Control & evaluation software
The PoreInspect software for the BELPORE porosimeter series of Microtrac offers a variety of functions. The software monitors and controls up to 4 measuring instruments connected via LAN completely independently with a PC and allows for individual control of all instrument parameters in real-time.
The data evaluation of the PoreInspect software not only takes the exact blank value correction into account, but also allows for a check and correction of possible sample compressibilities, guaranteeing most reliable results. Extensive evaluation options enable the selection of different pore models and their presentation as graphics and histograms. The calculations are freely selectable depending on the application and include, for example, the representation of fractal dimensions as well as calculations of tortuosity and permeability. Overlay, statistical evaluations, the creation of a method catalogue and data export are further features. The stored raw data is available at any time.
Evaluating pore size with the PoreInspect Software
Evaluating Particle size with the PoreInspect software
Kwik porosimeter BELPORE Series Typische Toepassingen
farmaceutica
emulsies
staal
Om de beste oplossing te vinden voor uw deeltjes-karakterisatie behoeften, kunt u onze toepassingsdatabase consulteren
Kwik porosimeter BELPORE Series Technische Gegevens
| Function | LP: Degassing, Hg filling, low-pressure porosimetry MP & HP: High-pressure porosimetry |
|---|---|
| Pressure range | LP: Vacuum up to 450 KPa MP: 0.1 - 228 MPa HP: 0.1 - 414 MPa |
| Resolution LP | 0.001 kPa in measuring range: vacuum to 0.1 kPA / 0.01 kPa in measuring range 0.1 - 450 kPA |
| Resolution MP | 0.001 MPa in measuring range 0.1 - 100 MPa / 0.01 MPa in measuring range 100 - 228 MPa |
| Resolution HP | 0.001 MPa in measuring range 0.1 - 100 MPa / 0.01 MPa in measuring range 100 - 414 MPa |
| Pressure detection accuracy | better than 0.1% F.S. |
| Pore size diameter | LP: 180 - 3.25 µm (UMP: 1,000 - 3.8 µm) MP: 15 - 0.0065 µm HP: 15 - 0.0036 µm |
| Particle size diameter | LP: 330 - 15 µm (UMP: 3,000 - 15 µm) MP: 40 - 0.015 µm HP: 40 - 0.01 µm |
| Max. detectable volume | LP & MP: 0.5 cm³ - 2 cm³ HP: 0.5 cm³ |
| Volume detection accuracy | better than 1% F.S. |
| Max. number of measuring points | 10.000 intrusion 10.000 extrusion |
| Gewicht | LP: 55 kg (121 lbs) MP & HP: 68 kg (150 lbs) |
| Dimensions (W x D x H) | LP: 40 x 67 x 80 cm MP & HP: 40 x 67 x 80 cm |
Kwik porosimeter BELPORE Series Downloads
Productinformatieblad BELPORE
BELPORE Series
